Below is a brief description of the simple, 10-step application process. Typical application time is 15-20 minutes. Snowboards that have torsion (raised areas or indentations) may take more time and effort to apply. A detailed picture installation guide will be included with each Boardcoverz™ purchase. It may also be viewed by clicking on the link at the bottom of this page.
Boardcoverz.com utilizes the finest quality materials for the production of our Boardcoverz™. With proper installation, your Boardcoverz™ product will remain on your board season after season.
Each original design Boardcoverz™ is sized and formatted for applications to adult sized snowboards (140cm-174cm). Printed size for each original design Boardcoverz™ is 13"x70". Printed colors may vary slightly from display renderings. Custom sizes and designs can be ordered through the custom design Boardcoverz™ option.
Required Installation Tools: Squeegee/Smoothing Applicator (provided with Boardcoverz™), Masking Tape, Razorblade or Exacto-Knife.
- Remove board's hardware
- Clean board's surface with window cleaner or alcohol (for best results)
- Dry layout of Boardcoverz™ for accuracy
- Tape Boardcoverz™ in place
- Hinge the Boardcoverz™ in half with tape
- Peel half the backing off revealing sticky side of Boardcoverz™
- Use squeegee/smooting applicator (provided) to adhere Boardcoverz™ to board
- Peel hinge off and repeat with other half of Boardcoverz™
- Trim excess material off of board's perimeter
- Reattach snowboard hardware
- Ride hard. Ride safe!
